An alternative route to lower the flammability of viscose fibres is presented. Instead of adding a flame retardant to the viscose dope chemically, we have grown a layer of silica (SiO₂) on the surface of a regenerated cellulose fibre via a sol–gel process. One set of samples was used as-received, while the other was pre-treated in an 18% NaOH solution, giving a rough, etched surface to the fibre. The different surface morphology of both fibre types triggered a different growth of silica layers. On an untreated fibre, silica formed a 300–400nm thick surface layer containing a high density of cracks and holes. Conversely, on a NaOH pre-treated fibre, the silica layer intruded into fibre interior, adhered more tightly to the fibre structure and formed an almost defect-free, thin (100nm) layer on the outer fibre surface. This type of silica layer increased the temperature at which the fibre started to decompose by 20°C. It also hindered significantly the flow of oxygen to the generated volatiles during the thermal decomposition, and increased the temperature of glowing combustion of the residual char; the temperature of the corresponding exothermic peaks increased by ca. 20°C and 40°C. In contrast, the thermal effects of silica coatings that grew on an untreated fibre were much smaller.