… This study analyzes the possibilities of using an irrigation sluice gate in submerged conditions
to measure water flow rate. Hydraulic experiments on sluice gate discharge capacity were …

… flow conditions below the inclined sluice gates and analyse the same. In the present investigation,
the flow through the inclined sluice gates … for free-flow and submerged-flow conditions …

… The main parameters of gate flow are Q:discharge, h o :approach flow depth, a:gate opening,
x:streamwise coordinate measured from the gate section, z:vertical coordinate measured …

… In the present paper, the flow under sluice gates will be analyzed, considering free or
submerged hydraulic jumps downstream of the gate. The objective is to verify the performance of …

… A sluice gate is an opening in a hydraulic structure used for controlling the discharge. Fig. 1
shows flow through a sluice gate … Downstream free flow occurs at a (relatively) large ratio of …

… Sluice gates are a very common way to control water level and discharge in open channels.
They are also used to measure flow rates given measurements of water levels and gate …

… ’s models in free flow and for EM and EML in submerged flow were reasonable. … sluice gates
and where the flow in open channels needs to be controlled or measured using sluice gates …

… flows interacting with a vertical sluice gate. Using Particle Image Velocimetry (PIV), laboratory
experiments were carried out to determine the 2D velocity field upstream of the gate. The …

… Flow below a vertical sluice gate in a rectangular channel of the same width can be divided
into two groups, free flow and submerged flow. … The submerged flow below the sluice gate is …

… of the channel and sluice-gate under these conditions is shown … in the neighbourhood of the
sluicegate, and a stagnation-point … Thus the sluice-gate may be regarded as a device which …