… of the computational model (WELDER code) to autogenous GTA welding procedures have
… weld material used during the non-autogenous welding procedure. The computational model …

… model by combining the welding arc and weld pool for the moving GTA welding on SUS304
… To provide reliable boundary condition for analyzing of weld pool, the welding arc is …

… al computer simulation model (WELDER code) which can … to the investigation of the CTA
welding process. The preliminary … linear welds, welds on inclined workpieces and welds under …

… K/s for laser welding. Overall, the proposed heat source model generalized the
applicability over a wide variety of materials and autogenous fusion welding processes. …

… In this study, the residual stress induced by autogenous laser welding was experimentally
and numerically investigated. An FE model was developed to study the evolution and …

… cross-section weld bead by the proposed model are in a … model regarding its capabilities
to represent the welding thermal history experimental work was carried out for an autogenous …

… Numerical modeling of autogenous welding and results analysis During the numerical
modeling of the autogenous weld, we will keep the same mechanical properties used previously. …

… The time dependent model of autogenous spot welding … The geometry and the weld parameters
of the model are the same as … All other parameters required in the numerical model are …

… several input power levels for autogenous gas tungsten arc welding. Arc efficiency is
experimentally … The model is shown to be useful for modeling autogenous welding of thick plates. …

… welding process modeling (LBWPM), including types of modeling including characteristics of
weld joint (… in the laser-MIG hybrid welding (LMHW) process compared to autogenous laser …