An integrated multiscale seismic imaging flow is applied to dense onshore wide‐aperture seismic data recorded in a complex geological setting (thrust belt).

An initial P‐wave velocity macromodel is first developed by first‐arrival traveltime tomography. This model is used as an initial guess for subsequent full‐waveform tomography, which leads to greatly improved spatial resolution of the P‐wave velocity model. However, the application of full‐waveform tomography to the high‐frequency part of the source bandwidth is difficult, due to the non‐linearity of this kind of method. Moreover, it is computationally expensive at high frequencies since a finite‐difference method is used to model the wave propagation. Hence, full‐waveform tomography was complemented by asymptotic prestack depth migration to process the full‐source bandwidth and develop a sharp image of the short wavelengths. The final traveltime tomography model and two smoothed versions of the final full‐waveform tomography model were used as a macromodel for the prestack depth migration.

In this study, wide‐aperture multifold seismic data are used. After specific preprocessing of the data, 16 frequency components ranging from 5.4 Hz to 20 Hz were inverted in cascade by the full‐waveform tomography algorithm. The full‐waveform tomography successfully imaged SW‐dipping structures previously identified as high‐resistivity bodies. The relevance of the full‐waveform tomography models is demonstrated locally by comparison with a coincident vertical seismic profiling (VSP) log available on the profile. The prestack depth‐migrated images, inferred from the traveltime, and the smoothed full‐waveform tomography macromodels are shown to be, on the whole, consistent with the final full‐waveform tomography model. A more detailed analysis, based on common‐image gather computations, and local comparison with the VSP log revealed that the most accurate migrated sections are those obtained from the full‐waveform tomography macromodels. A resolution analysis suggests that the asymptotic prestack depth migration successfully migrated the wide‐aperture components of the data, allowing medium wavelengths in addition to the short wavelengths of the structure to be imaged.

The processing flow that we applied to dense wide‐aperture seismic data is shown to provide a promising approach, complementary to more classical seismic reflection data processing, to quantitative imaging of complex geological structures.