Sliding abrasive wear characteristic of TIG cladded TiC reinforced Inconel825 composite coating
TiC reinforced Inconel 825 alloy matrix composite coating with different weight percentage
(20, 40, and 60) of TiC has been produced by TIG cladding process. With the increase in TiC
percentage in the produced coating a drastic alteration in the coating morphology perceived
predominantly due to the degree of melting of pre-deposited TiC particles. The sliding
abrasive wear measured through the height loss of the coated pin extracted from the TiC-
Inconel825 composite coatings executed against alumina abrasive wheel show the effect of …
(20, 40, and 60) of TiC has been produced by TIG cladding process. With the increase in TiC
percentage in the produced coating a drastic alteration in the coating morphology perceived
predominantly due to the degree of melting of pre-deposited TiC particles. The sliding
abrasive wear measured through the height loss of the coated pin extracted from the TiC-
Inconel825 composite coatings executed against alumina abrasive wheel show the effect of …
以上显示的是最相近的搜索结果。 查看全部搜索结果