… A statistical continuum model is developed in the … microstructural information for a two-phase
Ti-6Al-4V alloy to simulate the microstructure evolution during hot isothermal compression. …

… Ti-6Al-4V alloy in a strain rate range of 10 –5 –10 –2 s –1 and a temperature range of 750–900
C. Thermo-Calc calculation and microstructural … the uniaxial isothermal tensile tests at a …

… microstructures during thermal deformation. Zhang et al. [10] studied isothermal compression
tests of Ti–6Al–4V alloy … treatment on the microstructure evolution of Ti–6Al–4V alloy are …

… microstructural evolution in hot forming. To this end, compression was conducted on the TC6
alloy at … variables with a 50% reduction in height in isothermal compression of the TC6 alloy…

… constitutive models namely … Ti–6Al–4V alloy at various temperature and strain rates. In this
work, experimental data has been collected by conducting isothermal uniaxial tensile tests at …

… parameters on microstructure evolution during isothermal hot forging of Ti-6Al-4V in the …
alloys during sub-transus hot working,[1–3] mainly using modes of loading such as uniaxial …

… the microstructure evolution of Ti–6Al–4V and the modification of α grains morphology during
isothermal compression. Jia et … 7 that during the deformation of Ti-17 alloy at a deformation …

… of Ti–6Al–4V alloy during isothermal compression, a finite element (FE) analysis model on
the … coupling methods is necessary to be constructed to reveal the microstructural evolution. …

… (Ref 14) analyzed the microstructure evolution of GH690 alloy through … isothermal compression
experiment of TC4 titanium alloy is carried out by the Gleeble-3800 thermal simulator at …

… isothermal forging and heat treatment of titanium alloys to investigate the microstructure
evolution … systematically analyze the microstructure evolution of Ti-6Al-4V alloy prepared by HIP …