The specific length of a tunnel (STL) and a new analytical model for calculating the block surface area of the rock mass are introduced. First, a method for determining the appropriate length of a tunnel for a numerical simulation is described. The length is then used to examine the correlation between the inflow rate to the tunnel and the block volume, the block surface area, and the fracture intensity (P₃₂) through analytical and numerical modeling. The results indicate that the length of the tunnel should at least be equal to the least common multiple (LCM) of the apparent spacings of the joint sets at the wall of the tunnel to obtain the more reliable and immediate results for the inflow rate to a tunnel that is excavated in a fractured rock mass. A new analytical model was developed to calculate the block surface area and determine the essential joint set parameters, which include the dip, dip direction, and spacing. The determination of the rock block characteristics through numerical modeling requires considering the intact block for calculations. The results indicated that the inflow rate to the tunnel increased with an increase in fracture intensity and a decrease in block volume and surface area. The STL and the analytical model used for calculating the block surface area are validated through numerical simulations with 3DEC software version 7.0.