Traditional methods for mechatronics design are often based on a sequential approach, where the mechanical structure is designed first, and then fitted with off-the-shelf electric motors, drive electronics, gearheads and sensors. Finally a control system is designed and optimized for the already existing physical system. Such a design method, that doesn’t consider aspects from a control point of view during the design of the physical system, is unlikely to result in a system with optimal control performance. Furthermore, to separately design and optimize each of the physical components will, from a global perspective, generally not result in a system that is optimal from a weight, size or cost perspective.

In order to reach the optimal design of an integrated mechatronic system (mechatronic module) it is necessary to treat the system as a whole, considering aspects from all involved engineering domains concurrently. In this thesis such an approach to integrated design of mechatronic servo systems is presented. A design methodology that considers the simultaneous design of the electric machine, gearhead, machine driver and control system, and therefore enables global optimization, has been developed. The target of the design methodology is conceptual design and evaluation. It is assumed that the load to be driven by the servo system is known and well defined, a load profile describing the wanted load motion and the corresponding torque, is required as input. The methodology can then be used to derive the lightest or smallest possible system that can drive the specified load. Furthermore, the control performance is evaluated and optimized, such that the physical system design and the controller design are integrated.