… activated carbon regeneration/replacement, the presence of natural organic matter, activated
carbon … Box–Behnken design was employed with response surface methodology (RSM) to …

… Although the experimental design methodology eases and speeds up the study, there are
few papers that employed it [17–19]. In this research we applied the RSM method to design …

… Then, mixing 500 mL of Au-NP (0.5 g L −1 ) with activated carbon (10 g) in a 1000 mL flask
… the Au nanoparticles on the activated carbon. The carbon-supported Au nanoparticles were …

… surface methodology (RSM) and central composite design were applied to investigate the
optimal conditions for dyes adsorption onto Fe 3 O 4 -MNPs loaded on activated carbon (Fe 3 …

… The results obtained for activated carbons prepared by the one-step method were … those
for activated carbons prepared by the two-step method. The characteristics of activated carbons …

… activated carbon materials for the removal of organic and inorganic pollutants and its modeling
counterpart using response surface methodology (… water using activated carbon materials …

… The purpose of this research is to obtain optimal processing conditions for activated carbon
… surface methodology (RSM). The activated carbons produced were characterized by carbon …

… methodology (RSM). To achieve that, AC-Ni was prepared by loading nickel nanoparticles
on activated carbon (AC)… A response surface method was applied to determine the significant …

… of activated carbon is a combination of both physical and chemical adsorption (ie, the capacity
is governed by activated carbon’… of activated carbon is to produce activated carbon with a …

… , used RF method for modeling of Bromophenol blue dye adsorption using activated carbon
obtained from Astragalus bisulcatus tree [34]. It was found that the RF method is a powerful …