… the activated carbon with a … activated carbons with higher specific surface area. Taguchi
method also allows a more detailed and accurate assessment to prepare the activated carbon in …

… In the present study, the analytical utility of experimental design for evaluation of optimum
condition for the removal of MB in aqueous solution by Au-NP-AC coupled with ultrasound …

… polyethylenimine-modified activated carbon derived from waste tires (… experimental conditions
were found under response surface methodology (RSM)using central composite design (…

… the experimental design. The results suggest that pH values around the activated carbon pH
… The walnut shell based activated carbon showed, however, good removal efficiency over a …

… We used experimental design methodologies to obtain the response surface of the adsorption
process for three acid dyes used in the dyeing step of a tanning process. The dyes were …

The present study the ultrasound assisted adsorption of dyes in single system onto Fe 3 O 4
magnetite nanoparticles loaded on activated carbon (Fe 3 O 4 -MNPs-AC) was described …

… The present study was aimed to experimental design … onto the gold nanoparticles loaded on
activated carbon (Au-NP-AC… central composite design (CCD) and the optimum experimental …

… This study investigates the preparation of activated carbons from Glebionis coronaria L. …
PO 4 /g carbon) (1.5–2) were established. Further, full factorial experimental design at two levels …

… The volume of effluent treated per gram of activated carbon was higher at lower initial …
and lower amount of activated carbon. Yan model better fitted the experimental data of the …

In this research, the adsorption rate of safranine O (SO) onto tin sulfide nanoparticle loaded
on activated carbon (SnS-NPAC) was accelerated by the ultrasound. SnS-NP-AC was …