… was to investigate the adsorption of methylene blue onto WHS, which is … methylene blue
onto WHS was studied at 303, 313, and 323 K to determine the adsorption isotherms and thermo…

… Platanus orientalis leaves powder (POLP) to remove methylene blue (MB), a cationic dye,
from … pH on the MB adsorption were investigated. The adsorption was analyzed using different …

… for the first time to treat of methylene blue dye. The fig leaf-activated carbon (FLAC-3) was
prepared successfully and used for the adsorption of methylene blue dye (MB). The adsorbent …

… a good adsorbent and fitting of the adsorption isotherms and kinetic models would help in
determining the mechanism of adsorption. Methylene blue has been selected for the present …

… the batch adsorption isotherms and kinetics of methylene blue (… equation with a maximum
MB adsorption capacity of 259.25 mg/g. … The adsorption kinetic data were well described by the …

… (λ max ) of absorption at 661 nm. For the thermodynamic studies, similar procedures were
… Hereafter, 0.15 g/100 mL was selected as an optimum SAC dosage for adsorption studies …

… The current work investigates the adsorption behavior of methylene blue (MB) from …
studied. Applying the Langmuir isotherm fitting to the experimental data, a maximum adsorption …

… products of reactive adsorption. In this study, the kinetic and thermodynamic parameters
of MB dye removal using reactive adsorption were investigated. Furthermore, desorption …

… -cost adsorbent material for the removal of Methylene Blue dye (MB) and … thermodynamic
studies were conducted to evaluate the controlling mechanisms of MB and copper adsorption …

… The adsorption kinetics and equilibrium data were in good agreement with the pseudo-… Sips
adsorption isotherm respectively. Thermodynamic parameters suggest that the adsorption is …