… Here we report that gradient structured aluminum rods processed with SMAT have strength
that is twice as high as what is predicted by the rule of mixtures, which is dramatically higher …

… In the present study, mechanical behavior of bimetal composite rods was … bimetal rods, Al
6082/Al 7050, Mg AZ31/Mg ZK60 and Mg AZ31/Al 7050 and compared with the rule of mixtures …

… The rule of mixtures (ROM) for the flow curves and yield strengths during compressive test …
rod and hollow tube were directly measured from the specimens cut from the extruded rod. As …

… -diameter copper-clad aluminum wire (CCA). A 3 mm-diameter iron-clad aluminum wire (FCA)
was also obtained from the co-deformation of a 6 mm-diameter Al rod with an iron tube of …

… a monolithic Mg extruded rod also appears in that of the Al/Mg rods. This … rods slightly deviate
from the predicted ones by the rule of mixtures (about 4–36 MPa), while the rule of mixtures …

… in the original aluminum can, provided by the empty space between the aluminum rods, is
… This is encouraging to designers of aluminum MMMCs in that mixtures of strong aluminum …

… is only 64% of that predicted by a rule of mixture. Existing models, based on … aluminum
regions surrounded by randomly oriented SiC particles distributed randomly in the aluminum. …

… values calculated from the rule of mixtures. Similar agreement is … -called "rule of mixtures",
or on perturbations to this rule as a … the applicability of the rule of mixtures and the absence of …

… and wear behavior of aluminum matrix composites reinforced … pct lower than that of pure
aluminum, while the wear rates of … rule of mixtures and the existing models for friction and wear. …

… in a monolithic aluminum alloy and an aluminum alloy reinforced … rule of mixture, the phase
stress was measured by the X-ray method. The macrostress calculated by the rule of mixture …