… in order to analyse the effect of additives, in the mechanical properties and machinability
of the material. The ultimate goal of this work was to obtain optimal cutting conditions for any …

… The microstructural evolution of a 304 H austenitic stainless steel … orientation imaging
microscopy (OIM) maps. It was found that twins … of steels with required mechanical properties while …

… properties of austenitic stainless steel with strain-induced … (PH) maps of the four austenitic
stainless steels with and without … quality (IQ) value of all mapping data selected was ≥20%. As …

… of the mechanical properties of this kind of steel, it is therefore … the strength of metastable
austenitic stainless steels. On the … , and the white lines indicate the austenite grain boundaries …

… of austenitic stainless steels have been intensively studied. Austenitic stainless steels with
about 0.2 … 3c is twin crystal with slip lines in 2#, which is not seen in 1#. Twinning is one of the …

… [21] have also shown that a three layer ANN with sigmoid transfer function can map any
function of practical interest. We determined the optimal number of neurons in the hidden layer …

… deformation mapping is used to measure strain, material rotation and lattice rotation in
austenitic stainless steel at sub-micron resolution. Electron back-scatter diffraction maps are used …

… Heat input lines were introduced on the surfaces of the cold rolled strips (3 mm strip thickness).
The process is done by a welding line with electric arc welding. The working current was …

… Stainless steel possesses numerous desirable properties, … 1Cr12Ni2Mo2WVNb steel is a
new martensitic stainless steel … , V, and Nb) into the low-carbon steel containing 12% Cr. In the …

… to determine the crystallographic properties of the duplex stainless steel. Scanning electron
… of each individual phase in austenitic–ferritic stainless steels during tensile or compressive …