… steel fibres, in order to create steel fibre-reinforced waste sand concrete (SFRWSC). … sand
concrete. This novel fibre composite material, featuring high compression and tensile strength, …

… sand concrete bending strength with the granite dust as fly ash replacement. The granite
dust could reduce the 7 days bending … Taking the 56 days bending strength as an example, …

… EA2 had the maximum bending strength, which was 18.6% … bending strength, which proved
that the synergistic effect of EA and GF further enhanced the bending strength of the concrete…

… Meanwhile, replacing fresh water and river sand with seawater and sea sand in concrete …
concrete costs. In this study, the dynamic bending performance of seawater sea sand concrete (…

… Manufactured sand has good construction performance, and the compression and tensile …
of manufactured sand concrete (MSC) are comparable to those of natural sand concrete (NSC…

… and curing conditions in bending strength of polyester and epoxy concrete is analyzed.
Various … present better bending behaviour when manufactured with foundry sands. However, …

… This study focusing on comparing and forecasting the utilization of 0%, 10%, 20%, 30%
and 40% spent garnet as a sand replacement in high strength concrete at the age of 28 days. …

… sand core properties using precisely acquired 3-point bending test load curve data applying
standard bending … Further to bending strength and the elastic modulus, which can be directly …

… Appendix A shows the granulometric curves of the used sand and gravel; the surface dry
density of the sand and gravel is 2.62 and 2.64 g/cm 3 , respectively. The curing period for all …

… , the bending behaviour of ultra-high performance concrete … to predict the strength parameters
of concrete containing WFS… slump, compressive strength and bending strength. Sandhu et …