… fiber structure development in the high-speed melt spinning of sheath-core-… bicomponent
fibers. In the present study, sheath-core type bicomponent fibers of poly(ethy1ene terephthalate…

… properties of poly(ethylene terephthalate)/polyethylene bicomponent fibers in high-speed
spinning. II. Poly(ethylene terephthalate) sheath/polyethylene core fibers. Journal of Applied …

… bicomponent fibers consisting of PPS and PET has not been described in bicomponent fiber
… Depending on the position of the polymers in the bicomponent fiber, different crystallization …

… make a bicomponent fiber with poly(ethylene terephthalate) (… ponent fiber is slightly different
from that in single PET fibers [… -side and core-sheath bicomponent fibers that have a single …

… In the present study the sheath/core bicomponent fibers had PET as the sheath component.
… (50) bicomponent fibers were produced by high-speed spinning and the changes of fiber …

… bicomponent fibers was performed and the change of fiber structure with increasing take-up
velocity was investigated. Two kinds of polyethylene… , and poly(ethylene terephthalate) (PET) …

… fibers. In the present study, sheath-core type bicomponent fibers of poly (ethylene
terephthalate) (PET) and polyethylene (PE) were produced and the tensile behavior of the asspun …

… drawing process of polyethylene terephthalate (PET) side-by-side bicomponent fibers was
studied. … PET causes the self-crimping of bicomponent fibers. Although changing the heat-set …

… ) (LCP), and poly(ethy1ene terephthalate) (PET) were coextruded using two different
extrusion systems to form sheath-core type bicomponent fibers. The bicomponent fibers could be …

… Thermomechanical analysis of the as-spun bicomponent fibres was carried out by using
apparatus of our own manufacture. The fibre length and heating rate were 5 cm and 5 K/ min, …