… OFDM system [7], [8]. However, there is no evidence in [7] and [8] to justify how well this Q-factor
approach can match the practical error-counting method in an OFDM … OFDM signal can …

… of the fading channel on the OFDM signal may be treated as being … bit errors produced by
narrowband interference, the multiplicative effect of the fading channel on each OFDM signal …

… derived the bits error in the index part of the OFDMIM symbol, we are left with the error that
… either due to error in the index detection or due to the intrinsic error of the particular choice of …

… In this paper, the effect of memoryless, smooth non-linear distortion on bandpass OFDM
signals has been investigated. In particular, the OFDM power spectrum and the bit error rate af…

… (OFDM) baseband signals may be modeled by complex … instantaneous nonlinear amplifiers
and the signal-to-distortion … and the bit-error rate (BER) performance of OFDM systems in …

… rates with required low bit error rates, and given the nature of the OFDM signal, a … -OFDM
link. As a result, we first show that the transmitted symbols’ word-length can be restricted to 8-bit …

… We consider the best jamming scenario: The jamming signal bandwidth falls into that of
the OFDM signal completely. The portion of jamming signal bandwidth can be described by [2] …

… the expected absolute error, at the OFDM receiver, when different companding classes
are used. Since the error in the received time-domain signal is proportional to the error in the …

… OFDM symbol error probability which is the probability that the OFDM symbol contains no
bit errors … and sets a higher standard since all bit errors in a symbols must be corrected. The …

… symbol-error rate (SER) of uncoded orthogonal frequency-division multiplexing (OFDM)
systems … The results are applicable to cyclically extended OFDM signals characterized by a high …