… CFRP anchors in this investigation is immune from corrosion and compatible with the FRP
laminate … The objective of this study is to briefly describe the proposed CFRP π -anchor and to …

… with anchor spikes and CFRP jackets were found to have increased strength and deformation
capacity than those with CFRP … with the anchored FRP so that the fibers in the anchors can …

… of FRP and can limit the level of strength increase that can be achieved. In this investigation,
π-CFRP anchors … strength of the laminate at the anchor shank-FRP laminate contact line. …

… The principal objective of this study is to test the newly proposed CFRP π-anchor and to
investigate its potential to delay/prevent premature delamination of FRP laminates adhesively …

… anchor 2 plies of FRP laminate to the concrete. The patch anchor concept is further enhanced
by anchoring … Kakuta, A study on bond mechanism of carbon fiber sheet. in: Non-Metallic (…

… This saves time and cost over the field application of epoxy resin on both sides of the regular
FRP laminate (R-CFRP). Very limited investigations have been conducted to date on PS-…

… with CFRP laminate/sheet, with and without the C-anchor. The … of FRP laminate and the
presence/absence of the anchor. … performance of a new CFRP anchor, termed C-anchor, and to …

… CN104895251A) that use wavy surfaces to anchor FRP. The user may be misled by the …
anchoring prefabricated FRP laminates because, in this case, a force is applied to bend the …

… Although FRP … FRP-to-concrete joints anchored using unidirectional and bidirectional fiber
patch anchorages. The critical bond properties among multiple layers of FRP sheet, laminate, …

… The sectional size of CFRP anchors was defined in this study through the anchor material
ratio, which was equal to the equivalent anchor cross-sectional laminate area ( A Eqv ) divided …