… Small Angle Neutron Scattering (SANS) measurements are performed on the 9Cr–ODS
cladding tube, on a Fe–9Cr–1W ODS hot extruded bar and also on a Fe–14Cr–1 W ODS hot …

… the design of thinner cladding tube. 14Cr ODS-FeCrAl cladding tube manufacturing to the
final … In this study, many properties of the resulting cladding tube, including microstructure, …

… worked Fe–14Cr–15Ni–Ti modified austenitic stainless steel is used as the cladding tube …
Biaxial creep properties of the tubes have been studied at 973 K by carrying out creep tests …

… This study highlights the microstructural stability of an Fe-14Cr (Fe-14Cr-1W-0.3Ti-0.3 Y 2
O 3 ) ODS cladding tube during manufacturing. The investigated material is similar to 14YWT, …

… After drilling and straightening, the raw tube is manufactured into thin cladding tube using
cold rolling passes in a HPTR mill, punctuated by intermediate heat treatments to reduce …

… Fuel cladding tube … Seamless tube forming operation (HPTR or VMR cold pilgering process)
… Sequence diagram of the cycle test for martensitic grade (Fe-14Cr ODS) carried out in …

… scale is conducted and different tubes were produced. Their microstructure depends on the
martensitic (Fe–9Cr) or ferritic (Fe–14Cr) structure. To join the plug to the tube, the reference …

… of thin-walled (<0.4 mm) cladding tubes. … of Fe–Cr–Mo and Fe–Cr-W alloys showed that
these 5–10 at.% additions improved the 900 C oxidation resistance of alloys with 9–14%Cr [28]. …

… This paper describes the basic properties of Fe-9Cr and Fe-14Cr ODS steels in the form
of thinwalled tubes that have been manufactured to clad the fuel for the 4th generation of …

… Mechanical properties of 14Cr-ODS cladding tubes are presented for J37 and K12 on figure
5. Tensile tests are carried out on both longitudinal and circumferential directions by mean …