… evolution and cracking behaviors of the SLM-fabricated Al x CrCuFeNi 2 (x = 0, 0.5, 0.75,
1.0) alloys are studied. The microstructure evolution mechanisms and cracking mechanisms …

… could reduce the generation of cracks. However, the authors … have good laser absorption
and a good balance of melting point… laser melting of molybdenum is the formation of cracks and …

… The major goal of the present study was to evaluate the fatigue behavior of 316L
manufactured by selective laser melting. Both, crack initiation and crack growth behavior were …

… A β-solidifying Ti-40Al-9V-0.5Y (at.%) alloy with a high cracking sensitivity has … laser melting
(SLM) in this study. The influence factors for cracking sensitivity, cracking behavior and crack …

… Reports on the role of oxygen in solidification behavior and cracking … cracking associated
with the formation of high melting point phases and small grains during selective laser melting …

… building direction on fatigue crack propagation rate still … crack initiation and propagation
behavior of the SLM samples were observed in this work. The obvious difference of fatigue crack …

… Laser Melting Deposition (LMD) of Inconel 738 (… the cracking has not been thoroughly
understood and controlled. This paper conducts a comprehensive study on the cracking behavior …

… The crack growth behaviors under various scanning strategies are analyzed by electron
backscattered diffraction. The interlocking grain boundary structure, which increased the …

… of cracking behavior during SLM process for promoting its application in the future. In this
study, the microstructure, cracking behavior and … of microstructure and crack was discussed. …

… under different laser process conditions. The temperature of materials during the laser melting
… The results showed that the cracks often appeared after five layers laser deposition in this …