… procedure and the results from quasistatic cyclic testing to failure of the BRBF using the
proposed BRB gusset connection. The behavior of the connection is fully investigated and the …

… of gusset connections, including pinned gusset connection, bolted gusset connection,
welded gusset connection, pinned-welded gusset connection as well as pinned-bolted gusset …

… unconstrained gusset connection for buckling restrained braces in reinforced concrete
frame structures is proposed and tested … interactions between the steel gusset plate and the …

… of unconstrained gusset plates with conventional connections … Experimental results showed
that the unconstrained gusset … WSS gusset connections failed at the 25th and the 27th cycle, …

… Therefore, an unconstrained gusset configuration was proposed by Berman et al. [19], in …
frame action force in traditional welded gusset connection. Cyclic test program of three L-shape …

… This paper mainly reported the cyclic test of buckling-restrained braced frame (BRBF)
subassemblages with various gusset connections and quantification of gusset rotation response, …

… load and bending rigidity by testing ten large dual-gusset-plate connections used for BRBFs.
… story, 8 unconstrained splice plates were used to weld each BRB end to gusset connection. …

… the connection tip (unlike concentric braced frames), and the behaviour primarily depends
on the stiffness of the connection zone, gusset … [29,30] conducted cyclic uniaxial testing of 15 …

… Two different connecting methods, one with post-tensioned steel rods and the other embedded
stud group, were tested. The results of the cyclic loading tests on the gusset connection …

… During 1% drift cycle, a crack was observed at the weld toe … -mode buckling) between the
gusset plate and diaphragm plate or … The brace-to-gusset connection outside the surrounding …