… electrochemical dissolution on the cylindrical surfaces of stainless steel … laser masking. A
micropatterned recast layer was formed on the surface via ytterbium-doped pulsed fiber laser …

… steel was achieved by applying laser masking on cylindrical surface. Micro patterned … laser
irradiation on the workpiece surface. The micro patterned recast layer can be used as a mask …

… to produce textured surfaces is Laser Surface Texturing (LST)… on the material surface by a
pulsed laser beam, achieving … masking step on the cathode is required, instead of masking …

… laser ablation: (i) line scan with a contour mask which correlates with the desired topology
and (ii) gray scale mask … on surfaces like saw-tooth, spherical or cylindrical topologies with …

… masks is utilized for the generation of three dimensional surfaces (cylindrical micro lenses). …
5 shows a cylindrical borosilicate glass micro-lens made by mask projection ablation at 193 …

… laser mask. However, by combining the mask design and the moving of the mask or the
sample, 3D … A pair of cylindrical lenses (LC1 and LC2) and homogenizers are used so that the …

… the mask openings. In this work, a high speed laser shadowgraphy technique was used to
demonstrate experimentally, for the first time, the significant effect that the mask opening size …

… ), especially on glass surfaces. In this study, two-beam interference (TBI) of femtosecond
lasers was used to produce large-area straight LIPSSs on fused silica using cylindrical lenses. …

… surface spatial periods between 1 mm (the laser beam diameter) and 1 m. The input slope
data is converted to surface … , a significant portion of each end would need to be masked off. …

… cylindrical rod covered with photoresist is subarea-exposed with a collimated ultraviolet source
through a mask … layer that was machined by a laser. Then the sample was etched with a …