… effects of Y addition on the as-cast microstructure and mechanical properties of the Mg–3Sn–2Ca
(wt.%) magnesium alloy were investigated. The results indicate that adding 0.5 wt.%…

… in modern micro-alloyed Mg alloys to tailor the microstructure … or Y are added to AZ31B alloy
to examine the synergistic effect … in the AZW alloy (Mg-3Al-1Zn-1.0Y wt.%) no Y solute was …

… Mg–6Zn–1Mn alloy were investigated. The results show that the addition of Y has significant
effect … mechanical properties of Mg–6Zn–1Mn alloy. Varied phases compositions, including …

… in the removal of Fe from magnesium alloy melts remains not well understood. … Mn addition
method, in this study the effect of an addition of Y on the Fe-removal effect in magnesium …

… In this study, to evaluate the effects of Ca and Y on the mechanical properties, the corrosion
… of Mg alloys, Mg–xCa alloys (x = 0.5, 1, 2, 5, 10, 15 and 20.0) and Mg–1Ca–1Y alloy were …

… However, due to the high cost of long solutionizing and aging treatments, it would be
desirable to enhance the high-temperature mechanical properties of the Mg alloys in the as-cast …

… In the present work, this model was applied to predict the drag effect … additions used in
magnesium alloys. Unfortunately, a lack of diffusion data for the other RE elements in magnesium …

… A fundamental understanding of the effect of the combined addition of Ca and Y on the
corrosion behaviour of Mg alloys will broaden the industrial applications of Mg alloys. …

… , Y should have good effect on grain refinement[12]. But the grain refinement of Y addition
on the AZ31 alloy … are little separate Y phases in the AZ31-Y alloys. According to the binary …

… the alloys would be melted directly in air. Sakamoto[10] reported that Ca additions to Mg alloys
… by the formation of thin and dense CaO film on the surface of the molten alloy. Though Ca …