… was used to simultaneously adsorption the mixture of cationic dyes Rhodamine B (Rh B)
and Malachite Green (MG) from the aqueous solution. The synthesized adsorbent was …

… Malachite green removal was seen to increase with increasing contact time … malachite green
onto bentonite could be described by the pseudo second-order equation. The experimental …

… 2.3 Central Composite Design Response Surface Methods use specific experimental design
combinations to develop mathematical models with linear, quadratic, and interaction terms …

… and removal of malachite green (MG) from aqueous solutions. A 3 2 full factorial design was
… Experimental data obtained from kinetic studies demonstrated good concordance with the …

… CCD was chosen in this study and the levels of factors used for experimental design are
given in Table 3. The RSM was adopted to determine a suitable direction by increasing or …

… This work devoted to the investigation of adsorption of malachite green and Pb 2+ ions by …
used for simultaneous ultrasound-assisted adsorption of malachite green (MG) and Pb 2+ ions …

… study is experimental design optimization applied to the removal of malachite green (MG) …
using central composite design (CCD) and the optimum experimental conditions were found …

… Malachite Green (MG) is most commonly used for the dyeing … of Malachite Green was
investigated and Taguchi experimental … experiments concerned only with the main effects of …

… as an adsorbent for the malachite green (MG) dye removal from … ) was used to design the
experiments, model the adsorption … design (CCD) was performed for the experimental design …

… and removal of dyes, Malachite green (MG), … experimental design methods. In most cases,
the results of these two models were in agreement with each other and with experimental data …