In-band full-duplex (IBFD) technology can enable unique system capabilities and network …
communication systems, including 5G new radio. The potential of these IBFD systems can …

… user) systems that … fullduplex cellular communication systems, we propose two schemes
that exploit the excess of antennas present at the base-station (BS) of large-scale MIMO systems…

… range cause a residual self-interference floor that is 52 dB above the desired receiver
noise floor (ie, the noise floor experienced by an otherwise equivalent half-duplex system). …

… active signal injection (ASI) for full-duplex MIMO-OFDM systems. The ASI approach adds an
… understanding of the challenges and practical solutions to implement a fullduplex system. …

… fullduplex system presented in [6] has center frequencies of around 600 MHz while the
full-duplex systems … WiFi and Bluetooth systems and result in fullduplex systems with higher self-…

… To obtain more insights into the performance of the fullduplex system, we also study the
gains of the downlink and uplink channels separately in Fig. 4(a) and (b), respectively. We can …

… its performance withhalf-duplex systems which use the same … thefull-duplex and half-duplex
systems considered. We will compare the performance offull-duplex and half-duplex systems …

… where E[ ] denotes expectation operator, RFD, RHD is the fullduplex and half-duplex system’…
ratio in fullduplex systems, and SNRHD is the signal to noise ratio in half-duplex systems. …

… affect full duplex in 802.11 systems. … fullduplex system is realizable without channel
knowledge at either the transmitter or receiver. Moreover, unlike full-duplex systems, MIMO systems …

… 1 shows the block diagram for the narrowband fullduplex … present the channel model for
a two-way full-duplex system. … for full duplex systems which will be presented in Section VC. …