… rates (only 3.47% capacity loss after 350 cycles at a high rate of 10 C), which is the best one
… anode is highly needed to achieve both longer cycling life and higher rate performance. …

… rate of 100 mA g –1 . The material also exhibits a stable capacity of 676 mAh g –1 when
discharge at a high rate of … MoS 2 as a high-rate-capable lithium-battery anode and its reported …

… (38) Rate capability of the maleic acid anode obtained in this study is also much higher than
those of the traditional graphite anodes and the state-of-the-art silicon anodes. (4, 34, 43-45…

… In order to use a MoS 2 electrode as a possible candidate in a lithium battery, a synthetic
method should be simple for an easy scale-up. In addition, a high rate performance needs to be …

… as the lithium ion battery anode. This electrode exhibits high reversible capacity and fast
charging and discharging capability. A high capacity of 785 mAh/g is achieved at 1C rate and is …

… the optimized structure and composition of high-rate anodes and encouraging progress has
… high-rate anodes. The latest developments of carbon-based materials as high-rate anodes …

… Germanium has been extensively studied as an anode material for lithium-ion batteries as
it has a high lithium storage capacity and high lithium diffusivity. (25-29) Sodium diffusion in …

… as an anode material for sodium-ion batteries (NIBs). The measured electrochemical properties
are a high charge specific capacity (630 mAh g −1 at 0.2 A g −1 ) coupled to a good rate …

… 2 is a more reasonable anode material for high-power safety … a much attention as high-rate
anodes with potential application … limited significantly the rate performance of battery [25,26]. …

… for commercial LIBs when applied as anodes for SIBs. (7−9) Therefore, the application of …
anode materials, and developing anode materials for SIBs with high capacity, good rate …