… -cost adsorbents for the removal of methylene blue (MB) from … The presence of even very
small amounts of dyes in water – … Amongst the numerous techniques of dye removal, adsorption …

… Adsorptive removal of dyes from industrial effluent has attracted … A greatly enhanced adsorption
capability of PAA-based … our NC gel obviously was favorable for the removal of MB dyes. …

… , the adsorption capacity reached a plateau until the concentration of dye solution increased
up to 1.66 mg/mL, indicating that the removal of MB highly depended on the initial dye …

… MB removal. The results obtained using this method showed high efficiency and good adsorption
capacity of the functionalized MWCNTs for MB… used to remove MB dye before and have …

… The amount of adsorption for dye removal is highly … same MB concentration range. Yagub
et al. [13] studied the effect of initial dye concentration on the adsorption of methylene blue (MB…

… require very well absorption … adsorption kinetics of MB onto the samples in our case and
the rate limiting step would be chemisorptions 17 . Clearly, we can see that MB can be removed …

… for the adsorptive removal of cationic methylene blue (MB) dye from … removal efficiency
and adsorption capacity are strongly influenced by the change in the initial concentration of dye…

… containing dyes is very difficult to treat, since the dyes usually … of MB was removed by
Mn/MCM-41 in lower initial MB … isothermal adsorption parameters for the dye adsorption. The fit of …

… for the adsorption of heavy metals and dyes from wastewater. … it is very important and highly
desirable to effectively remove … , batch adsorption tests for the removal of Hg(II) and MB were …

… Therefore, we developed a highly efficient sorbent, … removal of MO and MB by the MCB-AC
beads. No significant influence of pH on dye removal was observed for the two organic dyes …