… counting the number of people in a certain area by using one IR-UWB radar. In this paper,
we propose a people counting algorithm based on one IR-UWB radar, as in [14] and [15]. The …

… impulse radio ultra-wideband (IR-UWB) radar sensors for counting … system utilizes two IR-UWB
radar sensors equipped with … The two electronic layers are used for sensing and direction …

… Then, we installed the IR-UWB radar sensor at a height of 2 m near the apex of each space
to collect the reflected signals of the individuals inside. Based on the above experimental …

… UWB radar module does not need high power signal generator, therefore the system can be
designed for low power consumption. In this paper, the IR-UWB radar … of IR-UWB radar is 40 …

… an impulse radio ultra-wideband (IR-UWB) radar sensor. … or systems using other sensors
have been proposed such as … Our gesture recognition algorithm uses IR-UWB radar sensor …

… To resolve this problem, we used two IR-UWB radar sensors … Two IR-UWB radar sensors
make adjacent two thin layers … Owing to the fine resolution of the IR-UWB, the radar sensor …

… In this section, the applied circuits are presented for use in the IR-UWB radar system. The
designed ICs are fabricated in an Si/SiGe heterojunction bipolar transistor (HBT) technology …

… of IR-UWB radar cannot be changed, unlike FMCW radar, and in this work we set the the
same bandwidths of FMCW and IR-UWB radars at 1.5 GHz. The frame rate of each radar was …

… We set the IR-UWB radar about 1 meter height from the floor and adjusted the angle of radar
to 45 degree downwards to measure the object’s movements. The observing range is about …

… In this study, impulse-radio UWB (IR-UWB) radar is used to detect, localize and track a …
IR-UWB radar has one transmitter and one receiver. The transmitter in the radar sends very …