… fabricate high-density stainless steel 316L (SS316L) parts via selective laser melting (SLM). …
speed of the laser could be much improved due to the use of 380 W power laser. The overall …

… A study on the laser spatter and the oxidation reactions during selective laser melting of
316L stainless steel, Al–Si10–Mg, and Ti–6Al–4V. Metall Mater Trans A doi: 10.1007/s11661-…

… This paper aims to study the characteristics of stainless steel 316L (UNS S31603) parts
produced using a selective laser melting machine. In the aerospace industry, turbine blades are …

… For this reason, microstructure, defect formation and mechanical properties of AISI 316L
components are investigated in this paper according to the process parameters used for their …

… Schematic diagram illustrating build (BD), scanning (SD), and transverse (TD) directions of
the selective laser melting process employed to fabricate the 316L SS samples examined in …

… on laser melting of SS grade 316L powder on top of AISI 316L substrate using a pulsed Nd:YAG
laser. … as laser power, scanning speed and beam size on geometry characteristics of the …

… In this study, laser re-melting is applied using a continuous wave laser during SLM of AISI
316L stainless steel parts mainly to study the microstructural changes by applying different …

… In this paper, the single-track formation and the deposition of block sample from 316L stainless
steel powders have been carried out by both SLM and LCD techniques. A comparison on …

… on microstructural properties in 316L stainless steel. The … the laser melting process and with
this in mind, the laser exposure … current investigation was 316L stainless steel powder, size …

… Laser Melting (SLM) processing parameters are known to greatly influence 316L stainless
steel final … of several SLM processing parameters (laser power, scanning speed and scanning …