… of chromium on tensile properties of steels … tensile properties of cold-rolled and annealed
extra low carbon steel was investigated systematically for wide range of chromium of 0% Cr …

… Thus, the effect of the tempering temperature on the tensile properties was studied. The
tensile properties were most strongly influenced by the amount of the reversed austenite …

… Tensile data for the low-chromium (2.25 pct Cr) steels tempered at 700 and 750 ~ … tensile
properties for 2.25Cr-2WV and 9Cr2WVTa steels--the strongest Cr-W steels--with the properties …

… fuel cladding applications, new low-Cr ODS FeCrAl alloys with … improved high temperature
tensile properties. Decreasing the … the high temperature tensile properties characteristic of …

… In contrast, ductility is lower in alloys with higher Cr … and mechanical properties of the Fe 40
Mn 28 Ni 32 − x Cr x (x = 4… Ni 28 Cr 4 , Fe 40 Mn 28 Ni 20 Cr 12 and Fe 40 Mn 28 Ni 14 Cr 18 …

… The β-phase transformation temperature is lower when the Cr content in the alloys is higher.
In alloys with a higher transformation temperature, the phase transition from the β-Zr phase …

… Cr has low solubility in the α-Al matrix, showing a tendency … When the Cr content is increased
and the presence of Fe is … mechanical properties (tensile strength and hardness) and low …

… ► M 23 C 6 precipitation can be inhibited by the Σ≤9 GBs and low angle GBs in Ni–Cr–W
based superalloy. ► M 23 C 6 carbides with four typical morphologies precipitate at the large …

… swelling and low temperature irradiation-induced embrittlement in ferritic–martensitic steels.
… and tensile properties in Fe–Cr alloys after neutron irradiation at 400C to relatively low dose …

… tensile tests of non-equiatomic NiFeCrCoMn alloys optimized for low SFE. This includes the
… It has a yield strength comparable to the Ni 18.5 Fe 18.5 Cr 18.5 Co 26 Mn 18.5 alloys, but …