… TIG welded joints after post weld heat-treatment. With metallurgical and microstructural
observations, microstructure in the TIG … the microstructure and mechanical properties of TIG welds …

… evolution of the welded joint and its mechanical properties. In this study, K-TIG welding was
used to weld 12 mm thick Ti-6Al-… The microstructure, texture, tensile properties, and impact …

… TIG welding and A-TIG welding process. Two different types of activating flux (Flux 1 and Flux
2) have been used during A-TIG … possible effect of the flux properties namely melting point, …

… of TBM and establish database on properties of CLAM steel, the … TIG welding experiments
of CLAM steel have been carried out, then the microstructure and mechanical properties …

… influence of direct current pulsing on the microstructure, room temperature hardness and
tensile properties at four different temperatures of tungsten inert gas (TIG) weldments of Ti–6Al–…

… welding technique (TIG or MIG) is best for the aluminium alloy. The comparison is done
on the basis of microstructure and mechanical properties of the welded joint of TIG and MIG …

… In the present study, A-TIG welding was carried out on grade … The room-temperature impact
toughness of the A-TIG as-… The A-TIG-processed grade 91 steel weld joint was found to …

… microstructure and mechanical properties of 304 stainless steel joints by tungsten inert gas
(TIG) welding, laser welding and laser-TIG … to study the microstructure characters of joints. …

… Mechanical properties, joint efficiency of A-TIG welds are found to be higher than normal TIG
… TIG and A-TIG specimens used in this study were welded using Panasonic Make welding …

… Further, the mechanical properties of A-TIG welding butt joint, (ie best and least GRG
experiment) were validated with the help of microstructure and SEM fractographic analysis. …