… This work deals with the processing of titanium powder by means of spark plasma sintering
… physical/mechanical properties and microstructural evolution with the sintering temperature. …

… In this study, spark plasma sintering was utilized to sinter silicon … plasma sintering on
densification and mechanical properties … of dense sintered bodies by spark plasma sintering was …

… the microstructure and the mechanical properties (dynamic and … sintering additive. The
SPS-processed B 4 C samples displayed a higher level of physical and mechanical properties …

… plasma sintering (SPS) of elemental nickel powders on its microstructure and mechanical
properties (… The results clearly indicate that as compared to the sintering pressure, the sintering …

… without sintering additives is … plasma sintering (SPS) technique together with the sintering
parameters (Holding Time and Pulsed DC). The influence of porosity on mechanical properties …

… The sintering behavior and the microstructural features of the obtained specimens were
discussed elsewhere. In the present study the static mechanical properties (Young modulus and …

… fabricated by using spark plasma sintering (SPS) and NaCl dissolution methods. A mixture
of Ti and sodium chloride (NaCl) powders were spark plasma sintered in a temperature range …

… -powders were consolidated by spark plasma sintering technique with low initial pressure
of 1 MPa and high holding pressure of 300 MPa at different sintering temperature. The effect of …

… Nano-SiC–Al 2 O 3 composites were densified using spark plasma sintering (SPS) process
by heating to a sintering temperature at 1350, 1400, 1450, 1500 and 1550C, at a heating …

… by a spark plasma sintering method and the effects of sintering temperature and SiC content
… and mechanical properties were investigated. ► It was found that the mechanical properties …