… In the alloys, a slight reduction of grain size was observed following zirconium additions.
After annealing at 400 C, relatively large, equiaxed grains over a few millimeters in size …

… mechanical properties of hot rolling TC4 and TxZ alloys, and the results indicate that all studied
TxZ alloys obtain good mechanical properties after Zr addition… The mechanical properties …

… , UTS of the 16Cr–4Al–Zr–ODS steel increases to 1180 MPa while keeping a large uniform
elongation up to 23%, indicating the enhancement of mechanical properties by Zr addition. …

… beneficial to the microstructural refinement and properties improvement of the alloy. Due to
… addition on the as-cast microstructure and mechanical properties of the Mg–3Sn–2Ca alloy. …

… Abstract: The effects of zirconium addition on the microstructure and mechanical properties
… The microstructure of as-cast Mg97Y2Zn1 alloy is refined by the addition of zirconium. During …

… the effect of Zr addition on Ni-, C-free Co-… mechanical properties before the hot-forging
process are investigated to understand the change of microstructures and mechanical properties …

… metallurgical and mechanical properties were investigated. 12Cr-1Zr steel was consolidated
with a grain size of about 1 цm by extrusion process of powder without mechanical alloying (…

… Substitution of zirconium with half a titanium component in the alloy was expected to …
hardening of the zirconium addition. In this study, the ability of the titaniumzirconium component to …

… The reasons for the enhanced mechanical properties by Zr addition can be attributed to
following factors. Firstly, according to Orowan strengthening mechanism [32], with the Zr addition…

… enhance their mechanical properties through governing … mechanical properties of ZTA.
This review also reported the most recent progress in the enhancement of mechanical properties …