… their pioneering development of melt spinning, nylon 6 was … melt spinning of nylon 6 fiber,
structural changes occurring in posttreatments of melt-spun fibers, and mechanical properties …

… Because of high melt viscosity, effective melt spinning is limited to polymers with intrinsic …
spinning. Molecular weight is not a primary characteristic responsible for mechanical properties…

… This paper continues our studies of structure development during melt spinning.10-12921-24
It is also part of an extensive study of the processing of polypropylene in our laboratories …

… influence of melt-compounded nano-phyllosilicates (or layered silicates) on the mechanical
properties and drawability of PA6 multifilaments in a high-speed melt spinning process with …

… on the thermal, mechanical, and morphological properties of melt-spun fibers of a textile- …
different spinning conditions are described. of five fibers for each DR. Mechanical properties …

… tensile properties of PLLA fibers prepared by melt spinning. A … -speed melt-spinning method
to produce PLLA fibers.24, 25 … fibers were prepared by melt spinning from PLLA with three …

… the interrelationship between the melt spinning and drawing variables on the nature of the
crystallinity and molecular orientation and in turn their influence on the mechanical properties. …

… They found that melt-spinning the polymer together with CB enables higher sensing …
melt-spun fibers as strain sensors are not yet in the market. On the other hand, melt spinning has …

… mechanical properties seriously. In order to overcome these problems, the combination of
melt spinning … -0.08Zr) was prepared by melt spinning and extrusion. The results show that the …

… have studied the melt spinning of metals by this method (glass-coated melt … mechanical
properties of an amorphous Fe80P16C3B1 filament produced by the glasscoated melt spinning. …