… , ~0.6 wt% and ~1.0 wt%, were added into the Mg-1.0 wt% Ca based alloys, to clarify their
effects on modifying the microstructure and mechanical properties of as-extruded Mg samples. …

… Hence the present study was conducted to evaluate the influence of Zn element in Mg–0.5Ca
alloys degradation and corrosion properties. Furthermore the relation of thermal …

… and corrosion behavior of the Mg-8 wt.% Mg 2 Si-x%Ca alloy have been studied by the use
of … The electronegativity values of Mg, Si, and Ca have been reported to be 1.2, 1.8, and 1.0, …

… Mg-Zn-Ca alloy, the resulting microstructure characteristics and corrosion performance of
the alloys … were used to prepare magnesium ingots with a nominal composition of Mg-1.0Zn-0.3…

… Due to EDS analyses, phase diagrams and previous studies on lean Mg–Zn–Ca alloys [9,44…
Mg 2 Ca while Zn is homogenously distributed in the matrix, maybe also substituting Mg in …

… For this behavior, we investigated a wide range of Mg–Al–Ca–Mn alloys processed … on
alloys with an Ca/Al ratio of ~1 with the sum of Al+Ca content ranging from 1 to 10 wt.%. All alloys …

… Mg-Zn-Sn based alloys with low-Zn and low-Sn content, this paper developed a low cost
wrought magnesium alloy Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca (wt… with minor Mn and Ca. The effect of …

… 7a, e), which implies the brittle characteristics, whereas that of the Mg-1.0Zn-0.2Ca alloy
consists of some shallow dimples, tear ridges and cleavage (Fig. 7b, f). As the Zn content …

… was in accord with the findings of Zhang and Yang [16], who tested the effect of 0.3–1.0%
calcium on an Mg–Zn–Mn system. An enlarged view of the microstructure of EW10X04 …

… The nominal chemical compositions of the Mg–2Zn-xCa alloys are shown in Table 1. The
exact chemical composition of the Mg–2Zn-0.3Ca alloy was obtained by optical emission …