… shown that in the Mg-Zn-Nd system, solute segregation to the grain boundaries is composition
… This study provides a guideline for the development of Mg-Zn-RE alloy systems with high …

… Mg-Zn alloy was found to exhibit high toughness and ductile fracture due to the segregation
of Zn at grain boundary, the Mg-… Obvious strain partitioning is detected between the DRXed …

… In that context we also followed the kinetics of partitioning of … the grain boundaries, solute
segregation to grain boundaries … on grain boundary precipitation in a model Al-Zn-Mg-Cu alloy …

… size, the maximum pole density in multiples of random distribution (mrd), the pole splitting
width about RD in degree … The pole splitting is largest for AX101 and smallest for AZX2101. …

… Hydrogen trap sites in Al-Zn-Mg alloys used in this study are grain boundaries, dislocations,
pores, vacancies, precipitate interfaces. In order to quantitatively analyze these trap site …

… grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-…
, was systematically investigated in a model Al-Zn-Mg-Cu alloy of near AA7050 composition. …

… 2 Sn phase is the logical place for the Na to partition to after extrusion, … the grain boundaries,
but in the grain interiors, it must be incorporated into the Mg 2 Sn particles when no Mg-Zn …

… of random density, MRD) with no significant splitting of the basal poles from the normal
direction. … for other solutes (such as Zn) are found to be similar in both Mg and Al, and the close …

… -oriented grains occurs, resulting in the texture having a splitting of … boundary.[43] On the
other hand, it has been recently suggested that grain boundary mobility of RE-containing Mg …

… 4 a–b) of each partition indicates that the parent grains, elongated in the extrusion direction
(ED), adopt a nearly perfect first order prismatic < 10 1 0 > -axis fiber texture. However, the …