… and the mechanical properties of extruded Mg–Zn–Y alloys … Several Mg–Zn–Y alloys with
varying SDAS were cast at … of initial microstructure to the evolution of microstructure during …

Mg–Al–Zn casting was subjected to two friction stir processing (FSP) protocols: single-pass
with a pre-solution treatment (Pre-ST) and two-pass. Both the two-pass FSP and Pre-ST FSP …

… The microstructure and texture were systematically investigated. Optical microstructure …
lattice rotation of the newly formed DRXed grains or affected the microstructural evolution. …

… The microstructure of the Al–Zn–Mg–Cu alloy before and after homogenization is studied
in the present work. The objective is to provide an understanding of evolution for the eutectic …

… the relevant microstructure evolutions, to quantify these evolutions, … investigations of
microstructural evolution during ageing … The Al–Zn–Mg–(Cu) alloys family provides some of the …

… strength and microstructure evolution with regard to multi-stage TMP of Al–Zn–Mg–Cu …
problem of how ageing parameters affect microstructure evolution of Al–Zn–Mg–Cu alloys is …

… Effect of 1 wt pct Gd addition on the microstructural evolution, mechanical properties and
bio-corrosion behavior of the biodegradable Mg-4Zn alloy was studied. The average grain size …

… -Mg + W-phase with the Zn/Y ratio of 1.5–2.0. For the Mg–6.0Zn–0.6Y–0.6Zr alloy in this study,
the Zn… However, no Mg 7 Zn 3 phase was identified, which is different from the observation …

… Microstructure evolution during homogenization of a low-alloying τ-type Mg–Zn–Al
magnesium alloy with a nominal composition of Mg–7% Zn–3% Al was investigated in this paper, …

… present Zn-added alloy shows different microstructure evolution process. The Mg 5 (Gd,Y,Zn…
to an ordered 14H LPSO structure which means Zn plays very important role during this …