… electrolyte in the study of selective corrosion in 316L ASS welded in the literature. Therefore…
on 316L ASS by applying 2M H 2 SO 4 + 1.5M HCl solution. In this work, we welded the steel …

… In this study we have assessed the microstructure details of 316L stainless steel produced
… revealed the formation of a rigid hierarchical microstructure, which was driven by the rapidly …

The microstructural development of 316L stainless steel (SS) was investigated over a wide
range of systematically varied laser powder bed fusion (LPBF) parameters, such as laser …

… For this reason, microstructure, defect formation and mechanical properties of AISI 316L …
Samples for microstructural and mechanical characterization are then produced based on …

… Stainless steel 316L (SS316L) vertical struts with various diameters … microstructure and
mechanical properties of the produced struts. The struts possessed hierarchical microstructures …

… to investigate and characterize the porosity, microstructural and mechanical differences
between the fusion lines and track bodies of an LMD built Stainless Steel AISI 316 L component. …

… the cause of material spattering and microstructural defects, eg pores and incompletely
melted particles. In this work, the microstructure and texture of 316L bars built along two different …

… Results of the investigation into the corrosion failure and microstructure of high-alloyed
AISI 316L austenitic stainless steel before and after welding allow to draw the following …

… spacing on microstructural properties in 316L stainless steel. The physical and microstructural
… The material used in the current investigation was 316L stainless steel powder, size range …

… the microstructure and the associated material properties of austenitic 316L stainless steel.
… The microstructure of the SLM-densified 316L steel processed by the four different devices …