… and mixed debris with three different recycling processes as subbase materials was studied.
… This study is very important since, should the results be acceptable, recycled aggregates …

… grain sizes of several millimetres, comparative measurements have been carried out with the
… Before each experiment the material was mixed using a hand drilling machine for at least …

… importance to understand the characteristics of the generated debris. Therefore, this study
aimed at investigating the debris particles generated with implantoplasty, including particles’ …

… flow and for such condition the bed is fixed, while in the TRENT-2D the bed is mobile and
completely coupled with the dynamic of the mixture. More in-depth model descriptions are …

… debris generated by fretting and sliding were usually examined separately. Though some
comparative studies exist [16,17], the wear debris … , thus reducing the comparative significance. …

… of porous debris beds consisting of a simulant of solidified corium was investigated in an
experimental study. The focus was on the effects of the geometrical shape of the debris bed and …

… comparative lack of studies and understanding of the subaqueous deposits of subaerial debris
… The experimental setup consisted of a mixing tank placed at the top of a steeply inclined …

… of UHMWPE material was a mix of adhesive wear and … and debris characteristics have
already had comparative analysis … characteristics of debris given in this study were based on …

… The study of debris flow initiation is carried out through a … capable of amplifying the debris
flow magnitude; and (iii) a … the Rudan-type basins and mixed (flow rate plus slope stability …

… , consist of the mixture of stainless steel (SS) and mixed oxide (MOX) fuel, while we used the
… A comparative study involving a series of experiments and simulation runs was performed …