… removal of MB and MG could be achieved when the sonication time was increased. The
rapid … All these indicated that ZnS: Mn-NPs-AC could be used to remove dye efficiently from …

… is on the rapid ultrasound-assisted removal of Methylene blue … carbon (ZnS:Cu-NP-AC)
as a low cost and environmental … Finally, 10 g of AC was added to the obtained ZnS:Cu-NPs …

… /PFOS removal and magnetic performance. Thus, this study provided a novel sorbent for
rapid and effective removal of … S4), although some separated magnetic NPs were observed. …

… N 2 sorption measurements were conducted to evaluate the surface properties of the Fe
3 O 4 NPs, bare AC, and AC-Fe 3 O 4 nanocomposite, as shown in Fig. 3. The N 2 isotherm …

… Ultrasound irradiation have a positive effect on the removal efficiency of MB whereas … NPs
shows high performance of MB removal using UAA, which was used for simultaneous removal …

… and economic method for MB removal from water by adsorption on Ag NPs-AC and/or Pd …
removal percentage increased rapidly and further addition has not significantly affected the MB …

… of any adsorption ability of magnetic NPs for dye removal. … AC powders and magnetic Fe
3 O 4 NPs (Fe 3 O 4 /AC … can provide efficient and rapid removal of contaminants from water. …

… findings indicate that for the removal of NPs, such as Ag NPs, Cu NPs, ZnO NPs, TiO 2 …
ZnO NPs at 34.5 mg L −1 are highly toxic and rapidly disrupt the methanogenic activity during …

… The study concluded that the AFPP can be efficiently used as a good, low-cost and green
substrate for the production of activated carbon and ZnO-NPs with dye removal characteristics. …

… NPs for BPA removal To verify the catalytic effect of RC/CNTs/Fe 3 O 4 NPs, we set up
experiments for the removal … PDS, (e) Fe 3 O 4 NPs-PDS, (f) CNTs/Fe 3 O 4 NPs-PDS, (g)RC/CNTs…