… laser II operates at , and the amount of injected optical power is high enough, laser diode I will
be locked to the injected … to model our laser diode with light injection and optical feedback. …

… that unlocking injection into the periphery of the optical … the injection strength should be one
to two times the feedback strength. We believe that optical injection into a chaotic laser diode …

… We present a simple analytical model that describes the injection current and temperature
dependence of optical feedback interferometry signal strength for a single-mode laser diode. …

… of the injection beam still requires thorough investigation. Here, we study the case of an
optically injected laser with a simple single-tone modulation term added to the injection signal. …

We analyse theoretically the nonlinear dynamics of a single-mode laser diode subjected to
both optical injection and optical feedback. Detailed mappings of the laser dynamics reveal …

… of optical frequency combs generated by gain-switching a single mode laser diode when
subject to optical injection… our system becomes more similar to the optically injected laser diode …

… injection locking of high-power laser diodes operating at 397 nm. We achieve stable operation
with an injection power of ∼ 100 μW and a slave laser … of the slave laser light via photon …

… dynamic properties of injection lasers are significantly affected by external feedback,
depending on interference conditions between returned light and the field inside the laser diode. …

… A light pulse with peak powerPo is emitted from the injection laser diode. This output is
slightly reduced by the transmission loss T, of the transmitter optics. The radiation propagates …

… new results for optically injected laser diodes when using two master lasers. We have … with,
and strongly dependent on, the injection of an additional optical signal. The frequency pulling …