… of fuel oil additives used in heavy duty conditions. … 320 MW power plant, in order to reveal
fuel additive effectiveness … belonging to the 320 MW power plant firing heavy fuel oil. It is not …

… Effectiveness of the employment of liquid heavy fuel oil in heat and power plants mainly
depends on the compliance of its characteristics with specified requirements. Due to the …

… An addition of additives to fuel oils prior to combustion is one way of reducing combustible …
that some additives improve, moderately, the combustive properties of fuel oils. Combustion is …

… [39], A case study looked at how switching a Central Mexican power plant from fuel oil to
natural gas lowered SO2 emissions. Power plant hourly fuel oil consumption data from a 2010 …

… in thermal power plants and boiler houses [… additives, including carbon nanotubes to a
heavy fuel oil has been conducted. The results of the rheological characteristics studies of fuel oil …

… Fuel additive technology is based on the use of a solid, fuel additive (iron, aluminium, … of fly
ash and result in 1–3% coal savings for pulverised coal combustion. The findings in this study …

… of the fuel oil, since they would not have been required if the oil had been … power, the latter
computed on the differential between high-pressure and lowpressure steam power generation…

… As an additive to heavy fuel oil, we used carbon nanotubes for the first time. … refinery,
used at the Kazan thermal power plant as an emergency and backup fuel, were taken as boiler …

… For enhanced experimental accuracy and reproducibility, a large two-stroke diesel engine
installed in a land-based power plant was used as the test subject. Evaluative tests were …

… At the present moment, fuel oil continues to be used as an emergency, reserve and
ignition fuel oil at power plants and boilers. The compliance of characteristics of liquid boiler …