… demonstrate injection locking of the recently discovered semiconductor double-quantum-dot
(… by more than a factor of 10 using injection locking. For the case when the input tone fin is …

… Until now, clock recovery using optical pulse injection locking … under injection locked
conditions [4–7]. In this work, we have experimentally observed that optical pulse injection locking …

… Passive mode locking was achieved at 1.3 μm in oxide-confined, two-section, bistable
quantum dot (QD) lasers with an integrated intracavity QD saturable absorber. Fully mode-locked …

We employ a nonequilibrium energy balance and carrier rate equation model based on
microscopic semiconductor theory to describe the quantum-dot (QD) laser dynamics under …

… our lowest injection level the locking range was approximately 2.3 GHz . The range of locking
… The locking range scaled as the square root of the injected power as expected. From these …

… For the case of a Fabry-Pérot (FP) semiconductor laser, especially for the active region in
a laser diode consists of quantum dot or dash structures, like the QD CCL investigated in this …

… For further insight into the physical origin of partial injection locking, we adjust the injection
current to I = 1.4Ithr, where the laser operates with only 70 photons in the cavity. While …

Silicon based InAs quantum dot mode locked lasers (QD-MLLs) are promising to be integrated
with silicon photonic integrated circuits (PICs) for optical time division multiplexing (OTDM…

The operation of an injection-locked quantum dot laser including the output characteristics,
modulation response, and linewidth enhancement factor (LEF) has been investigated in …

… , especially at very low injection ratios. Contrary to the GS, the injected locked RIN is the …
/ Hz enhancement at the lasing threshold and larger injection ratios. It was affirmed that the …