[HTML][HTML] Rapid cooling effect during solidification on macro-and micro-segregation of as-cast Mg–Gd alloy

X Tong, G You, J Luo, M Ebrahimi, G Wu - Progress in Natural Science …, 2021 - Elsevier
The high performance of as-cast Mg-RE alloys is always related to their high RE additions.
However, RE elements can be readily segregated in Mg alloys and the segregation …

Effect of cooling rate on the solidified microstructure of Mg-Gd-Y-Zr alloy

Z Jixue, Y Yuansheng, T Wenhui, W Jie… - Rare Metal Materials …, 2010 - Elsevier
The cooling rate has significant effects on the microstructure of Mg-Gd-Y-Zr alloy. It is found
that the increase of cooling rate can refine the solidified microstructure obviously. The grains …

[HTML][HTML] Microstructure evolution of semi-solid Mg–10Gd–3Y–0.5 Zr alloy during isothermal heat treatment

G Wu, Y Zhang, W Liu, W Ding - Journal of Magnesium and Alloys, 2013 - Elsevier
In this study, the microstructure evolution of semi-solid Mg–10Gd–3Y–0.5 Zr alloy during
isothermal heat treatment has been investigated. The results show that primary particles …

[HTML][HTML] The influence of holding time on the microstructure evolution of Mg–10Zn–6.8 Gd–4Y alloy during semi-solid isothermal heat treatment

S Nie, B Gao, X Wang, Z Cao, E Guo, T Wang - Metals, 2019 - mdpi.com
A semi-solid microstructure of Mg–10Zn–6.8 Gd–4Y alloys is acquired via an isothermal
heat treatment process, and the effects of the holding time on the microstructure evolution of …

Evolution of the microstructure and microsegregation in subrapidly solidified Mg–6Al–4Zn–1.2 Sn magnesium alloy

J Cui, T Luo, C Wang, Y Li, X Feng… - Advanced …, 2021 - Wiley Online Library
The evolution of the microstructure and microsegregation in a new type of Mg–6Al–4Zn–1.2
Sn (wt%) cast magnesium alloy solidified at cooling rates from 4.5× 101° C s− 1 to 2.3× 103° …

Grain refinement of Mg and its alloy by inoculation of in situ MgO particles

Y Wang, G Peng, Z Fan - Magnesium Technology 2017, 2017 - Springer
Significant grain refinement of commercial purity Mg and AZ91D Mg alloy was achieved by
intensive melt shearing imposed to the melts prior to solidification without addition of grain …

A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling

CY Ma, C Wang, ZM Hua, PY Wang, JG Wang… - Materials …, 2020 - Elsevier
The development of wrought Mg alloys with high alloying contents is greatly restricted by the
negative influence of coarse aggregative second phases originating from the casting …

Effect of Zr, Mn and Sc additions on the grain size of Mg–Gd alloy

XY Fang, DQ Yi, JF Nie, XJ Zhang, B Wang… - Journal of Alloys and …, 2009 - Elsevier
The effect of Zr, Mn and Mn+ Sc additions on the grain size of Mg–10Gd alloy has been
investigated and the grain refinement mechanisms are also suggested. The results reveal …

Effect of Ca additions on evolved microstructures and subsequent mechanical properties of a cast and hot-extruded Mg–Zn–Zr magnesium alloy

S Moradnezhad, A Razaghian, R Taghiabadi… - … International Journal of …, 2019 - Springer
The effect of calcium content on the microstructure and subsequent mechanical properties of
ZK60 magnesium alloy in the cast and extruded conditions were precisely studied. Alloys …

Effects of Zr and Mn additions on formation of LPSO structure and dynamic recrystallization behavior of Mg-15Gd-1Zn alloy

W Rong, Y Zhang, Y Wu, M Sun, J Chen… - Journal of Alloys and …, 2017 - Elsevier
The effects of Zr and Mn additions to Mg-15Gd-1Zn alloy on the formation of long period
stacking ordered (LPSO) structure under solution-treated (T4-treated) condition and the …