Microstructure evolution of Mg–10Gd–3Y–1.2 Zn–0.4 Zr alloy during high temperature heat-
treatment at 773K in the time range 12–72h is investigated. Addition of 1.2% Zn increases …

The effects of zinc addition and hot working via extrusion process on the microstructure and
mechanical properties of as-cast Mg–2Al-xZn (x= 0, 0.5, 1, 2, and 5 wt%) magnesium alloys …

The microstructure and texture evolution of Mg 98.5 Y 1 Zn 0.5 and Mg 92.5 Y 5 Zn 2.5
(atomic percent) alloys during hot extrusion were systematically investigated. The coarse …

Phase compositions and microstructure evolutions of three Mg–Y–Zn cast alloys during
isothermal annealing at 773 K have been systematically investigated to clarify the formation …

We have studied the microstructure evolution and deformation behavior of Mg-5Gd-3Y-(1Sn)-
0.5 Zr alloys during hot compression (T= 350° C, 400° C, 450° C and 500° C, ε˙= 0.002 s− 1 …

Abstract The effect of Zn/Gd ratio on dynamic recrystallization (DRX) of Mg–2Gd–xZn (x= 0,
1, 2 and 3 wt%) alloys was investigated by shear punch tests in the temperature range of …

We investigated the effect of Sm on microstructures and mechanical properties of Mg–Gd (–
Sm)–Zr by hot extrusion and aging treatment. The dynamic recrystallization (DRX) and …

The microstructure evolution of Mg–6 wt% Gd–2 wt% Y alloy (denoted as GW62) during
solid solution and aging process were investigated by optical microscope, scanning electron …

We have investigated the microstructure development of Mg–2.4 Zn–0.1 Ag–0.1 Ca (–0.16
Zr) alloys during hot extrusion using electron backscattered diffraction (EBSD), transmission …

Magnesium, the lightest structural metal, has limited industrial application due to its poor
formability at room temperature. However, the mechanism for the effect of alloying elements …