DHCPv6 Route Option Page 1 DHCPv6 Route Option draft-ietf-mif-dhcpv6-route-option-04 W.
Dec (wdec@cisco.com) T. Mrugalski (tomasz@isc.org) B. Sarikaya(sarikaya@ieee.org) T. Sun …

–Stateless; Stateless; Routers advertise prefixes that identify the subnet (s) associated with a
link; Hosts generate an" interface token" that uniquely identifies an interface on a subnet; An …

RFC 6939: Client Link-Layer Address Option in DHCPv6 [RFC Home] [TEXT|PDF|HTML] [Tracker]
[IPR] [Info page] PROPOSED STANDARD Internet Engineering Task Force (IETF) G. Halwasia …

1. Minimize the amount of work necessary to implement the solution through re-‐use of
existing standards and implementations as much as possible. 2. Provide a method of …

This document specifies a DHCPv4 option to indicate that a host supports an IPv6-only
mode and is willing to forgo obtaining an IPv4 address if the network provides IPv6 …

The Dynamic Host Configuration Protocol for IPv6 (DHCP) enables DHCP servers to pass
configuration parameters such as IPv6 network addresses to IPv6 nodes. It offers the …

Dynamic Host Configuration Protocol (DHCP) | part of Introduction to IP Address Management |
Wiley-IEEE Press books | IEEE Xplore Dynamic Host Configuration Protocol (DHCP) Abstract …

This document describes the Dynamic Host Configuration Protocol for IPv6 (DHCPv6): an
extensible mechanism for configuring nodes with network configuration parameters, IP …

Network Working Group G. Malkin Request for Comments: 2080 Xylogics Category:
Standards Track R. Minnear Ipsilon Net Page 1 Network Working Group G. Malkin Request …

IPv6 enables simple, automatic host configuration (T. Narten, 1998). Conversely, it does not
provide any specification to automatically delegate a prefix to a router. To solve this problem …