Abstract Ca single or Ca–Ce double microalloying Mg–Zn alloy was cast and extruded in the
present study. The combined addition of Ca and Ce improved the mechanical properties of …

Abstract The Mg-6 mass% Zn alloys microalloyed with different amounts of Ca were cast and
extruded. The second phase in the as-cast Mg-6Zn alloy is Mg 4 Zn 7, which is replaced by …

Abstract Mg–5.3 wt% Zn alloy microalloyed with 0.2 wt% Ca and 0.5 wt% Ce was extruded,
and the microstructure, texture and mechanical properties of the as-extruded alloy were …

The effects of Mn addition and the volume fraction of X-phase on the microstructure and
mechanical properties of the Mg–Zn–Y–Mn alloys with a Zn/Y ratio (at%) of approximately …

Abstract The Mg–6 wt% Zn alloys microalloyed with different amounts of La were cast and
extruded. The second phase in the as-cast Mg–Zn alloy is Mg 4 Zn 7, which was replaced by …

The effects of Ti additions (0, 0.4, 0.6, 0.8, 1.0, 1.2 wt.%) on the microstructure and
mechanical properties of as-cast and aging Mg-0.4% Zn-1.0% Zr-1.5% Ca (wt.%) alloys …

This work was undertaken to investigate the specific role of element Gd on the
microstructural evolution and mechanical properties of Mg-3Nd-0.2 Zn-0.5 Zr alloy. It is …

The microstructure and mechanical properties of a Mg-Zn-La alloy with and without Ca were
investigated in the present study. Results indicated that small addition of Ca in Mg-Zn-La …

In the present work, the microstructure, texture and mechanical properties of the as-extruded
Mg–xZn–yEr (x= 3, 6 and 9; y= 0.5, 1 and 1.5; x/y= 6) alloys were investigated. The results …

The microstructure, texture and mechanical properties of a series of Mg–Zn–Ca–Mn alloys
with three Zn/Ca ratios (2.63, 1.22 and 0.53, by weight ratio) were investigated. The …