In this work, the role of Al addition in modifying the microstructure and mechanical properties
of the Mg-1.0 Ca-xAl (x= 0.6, 1.0 wt%; termed as XA10 and XA11, respectively) based alloys …

In this work, the role of manganese (Mn) addition in tuning microstructure and mechanical
properties of the Mg-1.0 Al-0.4 Ca-x Mn (x= 0.6, 1.0, 1.34 wt.%) alloys are studied. When …

Due to the lack of secondary phases, low-alloyed Mg–Al series alloys usually exhibit low
strength. In this work, by the addition of Ca element, a microstructure consists of a large …

Abstract Effects of Al addition (0.0, 0.5, 3.0, 7.2 wt%) on microstructure, texture and
mechanical properties of Mg-3.5 Ca based alloys were investigated. Our results revealed …

In this work, the microstructure and mechanical properties of Mg–Al–Ca alloys containing
different contents (1, 2, 4 and 6 wt.%) of the Al 2 Ca phase have been investigated. The …

The role of Ca content (0.5, 1.0, 2.0 wt.%) on microstructure, mechanical properties and
strain evolution of as-rolled Mg-Al-Ca-Zn-Mn alloy was thoroughly investigated in this work …

The role of different Ca/Al mass ratios (ranging from 0.2 to 1.4) in modifying the
microstructure, phase evolution and the mechanical properties of Mg-Al-Ca-Mn alloys was …

In this work, the trace Ce atoms have been added into the low-alloyed Mg-Al-Ca matrix, and
the microstructure and mechanical properties have been investigated. For the Mg-Al-Ca …

A comparative study on the microstructural evolutions and mechanical properties of as-cast
and as-homogenized Mg-3.5 Al-4.5 Ca-0.4 Mn (wt.%) alloys with different Mg 2 Ca …

Grain boundary strengthening is an effective strategy for increasing mechanical properties of
Mg alloys. However, this method offers limited strengthening in bimodal grain-structured Mg …