The effects of clays as nanoscale fillers have been rarely addressed. Influence of the amount
of organoclay (ranging between 1 and 10 wt.%) on the nanocomposites structure, ie …

Polypropylene (PP) nanocomposites were prepared using montmorillonite with different
organic modifiers, and the effect of processing aid (EMCA and PPG) on the dispersion of the …

The structure, morphology and mechanical properties of polypropylene-nanoclay
composites containing 1 to15 wt.% nanoclay was investigated. Combination of wide-angle x …

Abstract Clay‐polypropylene (PP) nanocomposites (NCs) were prepared by melt
processing. Two types of PP with different levels of crystallinity were used. Mixtures of the …

The structure–property relationships of polypropylene (PP)-based nanocomposites
prepared by melt processing have been investigated with a main focus on the ratio of …

Clay containing polypropylene (PP) nanocomposites were prepared by direct melt mixing in
a twin screw extruder using different types of organo‐modified montmorillonite (Cloisite 15 …

In this work, polypropylene/clay nanocomposites with 0.5, 1, 3, and 5 wt% of montmorillonite
(MMT)(unmodified clay) were prepared by intensive mixing at 50 rpm and 10 min of mixing …

In the present investigation Polypropylene–Maleic anhydride grafted polypropylene–
organically modified MMT (PP-MAPP-OMMT) nanocomposites were prepared by melt …

Polypropylene-organoclay nanocomposites were prepared by melt processing via twin-
screw extrusion of three components: PP, maleic anhydride modified polypropylene …

Polypropylene (PP)/clay nanocomposites prepared by melt blending technique using
different percentages of clay with and without maleic anhydride grafted PP (MA‐PP) were …