[引用][C] 包衣玉米种子离散元参数分析与标定

刘瑞, 李衍军, 刘忠军, 刘立晶, 吕海涛 - 农业机械学报, 2021

[引用][C] 基于离散元法的碾米机三维仿真分析

姜鹏 - 2013 - 哈尔滨: 东北农业大学

小麦籽粒碰撞模型中恢复系数的测定

王成军, 李耀明, 马履中, 马征 - 农业工程学报, 2012 - cqvip.com
为了建立小麦颗粒在清选振动筛和播种器中的碰撞模型, 该文基于运动学方程原理构建了小麦
恢复系数测试装置, 对小麦的弹性特性进行了测定. 试验选择江浙皖地区推广使用的扬麦17 …

机施有机肥散体颗粒离散元模型参数标定.

袁全春, 徐丽明, 邢洁洁, 段壮壮… - Transactions of the …, 2018 - search.ebscohost.com
针对有机肥离散元模型接触参数和接触模型参数难以通过查阅文献或试验直接获得的问题,
该文提出一种通过仿真试验建立回归模型并结合物理试验寻优的方法, 对有机肥离散元模型参数 …

基于离散元的微型马铃薯仿真参数标定

刘文政, 何进, 李洪文, 李学强, 郑侃, 魏忠彩 - 农业机械学报, 2018 - cqvip.com
为系统全面地研究微型马铃薯种子离散元仿真物性参数, 根据其物料特征创建微型薯模型,
以此为基础建立微型薯离散元参数获取模型. 利用试验测定及仿真模拟相结合的方法对微型薯 …

Parameters calibration of discrete element model for corn stalk powder compression simulation

W Weiwei, CAI Danyan, XIE Jinjie, Z Chunling… - Nongye Jixie Xuebao …, 2021 - nyjxxb.net
In order to improve the accuracy of the parameters needed in the discrete element
simulation process of the corn stalk powder, the Hertz-Mindlin with JKR Bonding contact …

花生种子颗粒离散元仿真参数标定与试验.

吴孟宸, 丛锦玲, 闫琴, 朱彤… - Transactions of the …, 2020 - search.ebscohost.com
由于花生排种装置在优化设计过程中缺乏准确的仿真模型参数, 从而造成仿真与理论计算结果
存在较大误差, 一定程度上制约了花生排种装置的发展. 该研究系统测定了花生种子的三轴尺寸 …

Analysis and calibration of discrete element parameters of coated maize seed

LIU Rui, LI Yanjun, LIU Zhongjun, LIU Lijing… - Nongye Jixie Xuebao …, 2021 - nyjxxb.net
In order to determine the optimal contact parameter combination of discrete element
simulation of coated corn seeds, the error rates of repose angle and stacking angle of …

Calibration method of friction coefficient of granular fertilizer by discrete element simulation

WEN Xiangyu, Y Hongfang, W Gang… - Nongye Jixie Xuebao …, 2020 - nyjxxb.net
Whether the contact parameters between materials are set correctly affects the reliability of
the results of discrete element simulation test. At present, the calibration method of contact …

谷子摩擦特性试验及其影响因素分析.

杨作梅, 郭玉明, 崔清亮… - Transactions of the …, 2016 - search.ebscohost.com
为了给谷子机械化播种, 收获, 加工, 储运等作业装备设计及相关技术应用提供摩擦特性参数,
该文运用自制的小籽粒休止角测定装置, 摩擦系数仪, 直剪仪等试验设备, 测定了含水率分别为 …