The microstructure and tensile properties of the Mg-1.0% Sn-xY (x= 1.5%, 3.0%, 3.5%, atom
fraction) alloys extruded indirectly at 350° C were investigated by means of optical …

In the present study, the comprehensive effects of Ce addition and pre-twining deformation
on the microstructure evolution and mechanical properties of Mg-1.0 Sn-0.5 Zn alloys were …

The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded
Mg− 8Li− 3Al−(1, 2, 3) Sn (wt.%) alloys were investigated by X-ray diffractometry (XRD) …

The effect of extrusion ratio on microstructure and mechanical properties of as-extruded Mg-
6Sn-2Zn-1Ca (TZX621)(mass fraction,%) alloy was investigated. It is found that incomplete …

Abstract Effects of Zn/Al mass ratio on the microstructure evolution and mechanical
properties of the Mg–3Sn–5Zn-xAl (x= 0, 1, 2, 3 wt%) alloy were systematically investigated …

The microstructure and mechanical properties of as-extruded Mg-1.0 Sn, Mg-1.0 Sn-0.5 Zn,
Mg-1.0 Sn-0.7 Ca and Mg-1.0 Sn-0.5 Zn-0.5 Ca (all in wt%) alloy sheets were investigated …

The effects of little Ce addition on the as-cast microstructure and creep properties of Mg-3Sn-
2Ca magnesium alloy were investigated. The results indicate that adding 0.5%(mass …

In this work, the effect of Sm and Ce contents on mechanical property of Mg-Sm-Ce-Mn
based alloy have been investigated, and it is found that both the strength and ductility …

The microstructures and tensile properties of the as-cast and heat treated Mg–7Zn–5Al
based alloys with 1–6wt.% Sn addition were studied. The results show that all the Sn …

Abstract Effects of minor Sr addition (0, 0.2, 0.4, 0.6 and 1.0 mass%) on microstructure and
mechanical properties of the as-cast Mg–4.5 Zn–4.5 Sn–2Al-based alloy system are …